{"product_id":"sim-lab-dds26-base-direct-drive-26nm","title":"Sim-Lab DDS26 TorqueSync – 26 Nm Direct Drive Wheelbase","description":"\u003cp\u003eThe Sim-Lab DDS26 TorqueSync is a 26 Nm Direct Drive wheelbase for sim racing on PC, with a 350 V industrial servo architecture and TorqueSync™ processing, aimed at drivers who want high-end Force Feedback with maximum detail and instant response.\u003c\/p\u003e\n\u003cp\u003eDeveloped by Sim-Lab together with SOLO Motorcontrollers and manufactured in Italy, the DDS26 is engineered as a complete servo system, not a generic motor inside a consumer housing. Its internal 350 VDC bus and multi-core DSP control loop running at over 100 kHz keep torque stable through rapid direction changes and higher rotational speeds. The 1,500 W power supply is built into the base itself, with no external brick, and it joins Sim-Lab's new generation of \u003ca href=\"\/en\/collections\/wheelbases-bundles\"\u003edirect drive wheelbases\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey features of the Sim-Lab DDS26 TorqueSync\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e26 Nm real peak torque with true holding torque: it sustains rated force with no thermal roll-off, from the first lap to the last.\u003c\/li\u003e\n\u003cli\u003eHigh-voltage architecture with an internal 350 VDC bus at 25 A, giving headroom against back-EMF and a higher torque slew rate for sharp transients.\u003c\/li\u003e\n\u003cli\u003ePatented TorqueSync™ processing synchronises the simulator physics with motor torque more than 100,000 times per second, with no perceptible latency.\u003c\/li\u003e\n\u003cli\u003eIndustrial inner-runner AC brushless servo motor with harmonised magnet pairs and distributed-wound stator cores that minimise cogging and torque ripple.\u003c\/li\u003e\n\u003cli\u003e24-bit encoder with ~16.7 million counts per revolution for extremely accurate position feedback.\u003c\/li\u003e\n\u003cli\u003eIndustrial slipring, replaceable from the front, rated for 200 million cycles.\u003c\/li\u003e\n\u003cli\u003eIntegrated 1,500 W supply and active fan cooling: a single mains cable and fewer failure points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eSim-Lab DDS26 TorqueSync\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003ePeak torque\u003c\/td\u003e\u003ctd\u003e26 Nm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eTechnology\u003c\/td\u003e\u003ctd\u003eDirect drive wheelbase · industrial AC brushless servo (SPMSM)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eInternal bus\u003c\/td\u003e\u003ctd\u003e350 VDC at 25 A\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003ePower supply\u003c\/td\u003e\u003ctd\u003e1,500 W integrated (peak)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eProcessing\u003c\/td\u003e\u003ctd\u003eMulti-core DSP · 100+ kHz torque loop · TorqueSync™\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eEncoder\u003c\/td\u003e\u003ctd\u003e24-bit · ~16.7 million counts\/rev\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eSlipring\u003c\/td\u003e\u003ctd\u003eIndustrial, front-replaceable · 200 million cycles\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eQuick Release\u003c\/td\u003e\u003ctd\u003eXero-Play Quick Release v2\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eConnection (base)\u003c\/td\u003e\u003ctd\u003eUSB 3.0 + 12 V · Safe Torque Off (STO)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003ePassthrough (wheel)\u003c\/td\u003e\u003ctd\u003eUSB 2.0 data · 5 V \/ 2.5 A power\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eWheel interface\u003c\/td\u003e\u003ctd\u003eØ70 mm · M5 bolt pattern\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eMounting\u003c\/td\u003e\u003ctd\u003eWheeldeck · front · side\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eCooling\u003c\/td\u003e\u003ctd\u003eActive fan cooling\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eMains input\u003c\/td\u003e\u003ctd\u003e110 \/ 240 VAC\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eDimensions\u003c\/td\u003e\u003ctd\u003e305 × 130 × 130 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eWeight\u003c\/td\u003e\u003ctd\u003e11.1 kg\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eSoftware\u003c\/td\u003e\u003ctd\u003eRaceDirector™\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e4 years\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eItaly (with SOLO Motorcontrollers)\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eDDS26 or DDS39?\u003c\/h2\u003e\n\u003cp\u003eBoth models share the same motor, electronics, TorqueSync™ processing, connectivity and mounting system; only torque and power change. The DDS26 delivers 26 Nm from a 1,500 W supply. If you want the ideal balance for GT, formula and open-wheel, this is your pick; if you prefer even more force, consider the \u003ca href=\"\/en\/products\/sim-lab-dds39-base-direct-drive-39nm\"\u003eSim-Lab DDS39 TorqueSync\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Sim-Lab DDS26 TorqueSync works with PC (Windows) and with iRacing and the rest of the popular PC racing sims. Its ecosystem is open: it accepts Sim-Lab, GRID Engineering and third-party wheels with the Ø70 mm M5 bolt pattern, via USB-C, USB-A or internal-connector passthrough. With precision rails on all four sides and built-in front-mount, it installs into \u003ca href=\"\/en\/collections\/cockpits\"\u003ecockpits\u003c\/a\u003e by wheeldeck, front or side mount. It is not compatible with consoles (PlayStation or Xbox).\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the Sim-Lab DDS26 compatible with consoles?\u003c\/summary\u003e\u003cdiv class=\"faq-a\"\u003e\u003cp\u003eNo. The DDS26 TorqueSync is a PC (Windows) wheelbase, compatible with iRacing and the other popular PC sims. It does not work with PlayStation or Xbox.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is TorqueSync™ and how does it improve Force Feedback?\u003c\/summary\u003e\u003cdiv class=\"faq-a\"\u003e\u003cp\u003eTorqueSync™ is Sim-Lab's patented signal-translation technology: it synchronises every update from the simulator physics with the servo more than 100,000 times per second, removing the delay. The result is immediate, proportional torque when you lose grip or clip a kerb.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy a 350 V architecture instead of 48 V?\u003c\/summary\u003e\u003cdiv class=\"faq-a\"\u003e\u003cp\u003eThe internal 350 VDC bus provides voltage headroom to overcome back-EMF at higher rotational speeds, keep torque available across a wider speed range and achieve a higher slew rate. In practice this means sharper, more alive Force Feedback through direction changes and counter-steers.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs 26 Nm enough for sim racing?\u003c\/summary\u003e\u003cdiv class=\"faq-a\"\u003e\u003cp\u003eYes. 26 Nm comfortably covers everything from GT to formula and open-wheel, with plenty of detail and punch for most drivers. True holding torque also keeps rated force with no thermal roll-off throughout the session.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDDS26 or DDS39: which should I choose?\u003c\/summary\u003e\u003cdiv class=\"faq-a\"\u003e\u003cp\u003eThey share platform, processing and mounting; only torque and power differ. The DDS26 delivers 26 Nm from a 1,500 W supply and the DDS39 reaches 39 Nm with 2,500 W. Choose based on the Force Feedback punch you want and the weight of the package.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat does the Founders Edition include and what warranty comes with it?\u003c\/summary\u003e\u003cdiv class=\"faq-a\"\u003e\u003cp\u003eThe launch Founders Edition includes the new Xero-Play Quick Release v2, a Founders Edition engraving with an individual serial number and a collector's booklet, plus the mounting kit. Every DDS TorqueSync™ wheelbase carries a 4-year international warranty.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdiv class=\"sfy-trust\"\u003e\u003ch3\u003eBuying your direct drive wheelbase from Simufy means buying with full guarantees\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOfficial premium sim racing distributor in Spain and Portugal — over 70 brands\u003c\/li\u003e\u003cli\u003eThe only Official Fanatec out-of-warranty Repair Centre in Europe\u003c\/li\u003e\u003cli\u003eSimucube Premium Reseller — one of only four in Europe\u003c\/li\u003e\u003cli\u003eShipping from our own 5,000 m² warehouse and Barcelona showroom\u003c\/li\u003e\u003cli\u003eSpecialised technical support and official warranty on every product\u003c\/li\u003e\u003cli\u003eTailored financing: leasing and renting available\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"Sim-Lab","offers":[{"title":"Default Title","offer_id":54415177154893,"sku":"SLA237","price":1499.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/7709\/6450\/files\/Sim-Lab-DDS26-TorqueSync-Base-Direct-Drive-26Nm-simufy_3.webp?v=1785255476","url":"https:\/\/simufy.com\/en\/products\/sim-lab-dds26-base-direct-drive-26nm","provider":"Simufy","version":"1.0","type":"link"}