Dayton Audio BST-2 35 W – Bass Shaker

Brand: Dayton Audio
Dayton Audio BST-2, 35 W tactile bass shaker for sim racing and home cinema
Dayton Audio BST-2 tactile transducer with cast aluminium housing
Mounting kit for the Dayton Audio BST-2 with bracket and hardware
Attached leads and foam gasket of the Dayton Audio BST-2 bass shaker
Pre-drilled mounting holes of the Dayton Audio BST-2 seen from the back
Dayton Audio BST-2, 35 W tactile bass shaker for sim racing and home cinema
Dayton Audio BST-2 tactile transducer with cast aluminium housing
Mounting kit for the Dayton Audio BST-2 with bracket and hardware
Attached leads and foam gasket of the Dayton Audio BST-2 bass shaker
Pre-drilled mounting holes of the Dayton Audio BST-2 seen from the back

Dayton Audio BST-2 35 W – Bass Shaker

Brand: Dayton Audio
/
Tax included. Shipping calculated at checkout.
  • Inventory on the way
%3Cp%3E%C2%A1%3Cstrong%3EGana%20[points_amount]%20%3C/strong%3Econ%20esta%20compra!%3C/p%3E
100% secure payment

100% secure payment

3-year warranty

3-year warranty

Shipping within 24/48 hours

24/48 hour delivery (Iberian Peninsula)*

Personalized attention

Personalized attention

*More information in Shipping Policy.

The Dayton Audio BST-2 is a 35 W tactile bass shaker (transducer) at 4 ohms with a 10-80 Hz response for sim racing, gaming and home cinema that turns your seat or cockpit into a surface that vibrates with the deepest bass.

Unlike a speaker, the BST-2 doesn't reproduce audible sound: it captures frequencies too low to hear and converts them into physical vibration, so you feel the explosion, the thunder or the engine without turning up the volume. Its cast aluminium housing dissipates heat for a long service life, the dual suspension keeps a linear motion free of noise, and it includes 24" (61 cm) attached leads and a foam gasket for quick, rattle-free mounting on any flat surface.

Dayton Audio BST-2 key features

  • 35 W RMS at 4 ohms: 10-80 Hz response focused on bass impact.
  • Dual suspension: linear motion for powerful, clean vibration with no unwanted noise.
  • Cast aluminium housing: dissipates voice-coil heat for a long service life.
  • Quick mounting: 24" (61 cm) attached leads, anti-vibration foam gasket and 4 pre-drilled holes.
  • Vibration without noise: you feel the bass without flooding the room with sound pressure.
  • Scalable: up to six units with the right amplifier.

BST-2 technical specifications

SpecificationValue
Power (RMS)35 W
Impedance4 Ω
Frequency response10-80 Hz
Resonance frequency (Fs, unmounted)30 Hz
Peak force25 lb
Housing materialHigh-grade cast aluminium
SuspensionDual
Leads24" (61 cm) attached
Dimensions13.1 cm Ø × 5.5 cm height
Weight1.18 kg
Recommended low-pass filter≤ 80 Hz
Manufacturer part number295-245

Compatibility

The BST-2 needs a bass shaker amplifier that supports 4 ohms; Dayton Audio recommends the SA70 for one or two units, the APA150 for four (series-parallel at 4 ohms) and the BSA-200 for six (series-parallel at 6 ohms). In sim racing it's driven from PC with SimHub or other telemetry software, and it also adds impact to home cinema and gaming. Apply a low-pass filter at 80 Hz or below to remove unwanted high frequencies. You can add the dedicated BST-2 mounting kit for a clean fit.

Dayton Audio BST-2 FAQ

Is the Dayton Audio BST-2 good for sim racing?

Yes. Mounted under the seat or on the cockpit frame, the BST-2 reproduces the engine, bumps and track impacts as physical vibration. It's driven from PC with SimHub to sync the effects with your telemetry.

What's the difference between the BST-2 and the BST-1?

The BST-1 delivers 50 W RMS and the BST-2 35 W RMS. The BST-2 stands out for its dual suspension, its 24" attached leads and its foam gasket, designed for quick, quiet mounting on any flat surface.

Do I need an amplifier for the BST-2?

Yes. The BST-2 is powered by a bass shaker amplifier that supports 4 ohms. Dayton Audio recommends the SA70 for one or two units, the APA150 for four and the BSA-200 for six.

How many BST-2s can I connect together?

Up to six with the right amplifier, wired in series-parallel to set the impedance. Always check in your amplifier's manual that it supports the final impedance.

Does the BST-2 make audible noise?

No. The BST-2 generates vibration, not sound, and its dual suspension avoids unwanted noise: you feel the bass without turning up the volume or disturbing the next room.

Buying your bass shaker from Simufy means buying with full guarantees

  • Official premium sim racing distributor in Spain and Portugal — over 70 brands
  • The only Official Fanatec out-of-warranty Repair Centre in Europe
  • Simucube Premium Reseller — one of only four in Europe
  • Shipping from our own 5,000 m² warehouse and Barcelona showroom
  • Specialised technical support and official warranty on every product
  • Tailored financing: leasing and renting available

Preguntas frecuentes

Un producto en PRE-ORDER significa que aún no está disponible para entrega inmediata, pero uqe está en camino y se puede reservar con antelación antes de su disponibilidad oficial. Esto garantiza que se tendrá acceso al producto una vez que esté en stock. Recomendamos realizar el PRE-ORDER para evitar quedarse sin una unidad y saltar al siguiente batch.

Las fechas de disponibilidad de los productos en pre-order se indican en la página de producto correspondiente o también en nuestro canal #pre-orders de Discord: https://discord.gg/simufy

Cuando un producto está en stock, significa que está disponible en nuestros almacenes y puede ser enviado de manera inmediata tras realizar el pedido.

Rotundamente sí. Los productos ofrecidos son seleccionados cuidadosamente para cumplir con altos estándares de calidad. Esto garantiza que los materiales utilizados sean duraderos, seguros y adecuados para el propósito previsto.

Puedes saber si el producto que deseas está en stock revisando la página del producto. Normalmente, aparecerá un mensaje que indica su disponibilidad, como "Envío inmediato" o las unidades disponibles. Si no está en stock, es común que se muestre uno de estos estados: - Agotado: No hay unidades disponibles y podría haber que esperar a que se repongan. - Pre-order: El producto está disponible para reservar antes de que llegue al almacén.

No, todo pedido se envía mediante un único envío. Si el pedido contiene artículos en stock y sin stock, el pedido será enviado tan pronto estén todos los artículos del mismo en stock. Si se desea recibir los artículos en stock de manera inmediata, es necesario realizar múltiples pedidos o solicitarnos el cargo de un porte adicional.

Tarjetas de crédito VISA o MasterCard, PayPal, Aplazame, Klarna o Transferencia Bancaria

Simufy pone a disposición de cualquier cliente la posibilidad de aplazar el pago de cualquier o todos sus pedidos a través de la entidad financiera Aplazame o Klarna.

Klarna ofrece financiación válida para pedidos de un importe de hasta 1.500€ y en un máximo de 3 plazos sin intereses.

Aplazame ofrece financiación válida para pedidos de un importe de hasta 3.000€ y en un máximo de 24 plazos con intereses. Cuota inicial y plazos venideros totalmente flexibles a su elección.

Sí, siempre y cuando el producto se reciba en el mismo estado que se envió. El reembolso se efectuará tras la verificación manual y conformidad del producto devuelto, por el mismo medio que se efectuó el pago. Para más información puedes consultar nuestra Política de devoluciones.