THE ULTIMATE STEERING WHEEL

TECHNICAL SPECIFICATIONS

• Diameter of 295mm
  
  

• The polyurethane grip, produced by high-precision molds , has a special coating on its surface, and its delicate texture meets various riding needs.

• The rear cover and cams are processed using CNC technology and coated with black anodizing for optimal appearance and long-lasting durability .

• The front panel and paddle shifters are made of 4mm 3K carbon fiber with a high-end textured coating.

• 4.3-inch IPS display with a resolution of 8000x480 pixels and a refresh rate of 60 fps, and its control panel can be customized through SimHub .

• 2.4G low latency wireless functionality (optional).

• In Fanatec mode, it is compatible with PS4/5 (tested only on DD Pro and GT7, need to purchase XGT Wireless Kit separately).

• Supports SimHub wireless control panels.

• 21+14+5 RGB LEDs that can be customized via SimHub.

• Scratch-resistant Gorilla Glass, up to 2 mm thick.

• 14 RGB buttons with 500g actuation force, 2 funky multi-directional switches with integrated encoder and 5 push button encoders, 2 thumb knobs.

• It comes with standard magnetic shifter paddles, and optional clutch paddles and shifters are available.

• Clutch cams can be set in either bite point mode or shaft mode.

• All paddles use non-contact Hall sensors for long-lasting durability.

• 70mm diameter QR mounting hole.

• It can be connected to Leoxz Fanatec QR via QR cable interface to unlock the torque of Fanatec base.
  

• Equipped with an industrial-grade GX12 threaded USB interface and a double-twisted USB cable with nylon tensile strength, subjected to 100,000 cycles of cable twist testing.
  

COMPATIBLE HARDWARE

• Simucube SC1, SC2

• Fanatec DD1, DD2, CSW, CSL DD, DD Pro (Need to unlock base torque with Fanatec QR from Leoxz)

• Simagic Alpha Mini, Alpha, Alpha Ultimate

• Moza R12 (The V1 base does not support power supply via QR code. The V2 base does support QR code functionality, but Leoxz has only tested it on the R12, so compatibility with other bases cannot be guaranteed. In this case, a USB cable can be used for power supply.)

• Asetek Direct Drive Bases - La Prima, Forte, Invicta. (Installation of the Invicta Quick Release Steering Wheel Adapter is required.)

• If a Simagic, Moza, or Fanatec base is used, the wheel can be powered wirelessly via QR code. For the Simagic base, since it cannot provide high power to the wheel, to ensure stable operation, it is necessary to dim or even turn off the button lights to minimize the wheel's power consumption.

SOFTWARE

SimHub and SimBridge
SimHub to obtain telemetry data
SimBridge is used to receive data from SimHub and send it to XGT

PACKAGING

Dimensions (LxWxH): 33 cm x 19 cm x 14 cm
Weight: 1.5 - 2.0 kg

INCLUDES

• XGT Ultimate steering wheel depending on the chosen variant
  
• USB cable type GX12
• Custom sticker set
• Nylon Tweezers

GRADES

• The Leoxz XF1 Pro steering wheel can only be used in sim racing.
• Regardless of the power receiving interface (QR or USB), the maximum input voltage can only be 5V.
• For the QR power input, the maximum voltage is 12V. Exceeding these maximum voltage limits may result in damage to the flywheel.
• The free version of Simhub only outputs data at 10 frames per second; an additional license is required to support 60 frames per second.
  
• When using the steering wheel's wireless functionality, it is recommended to place the wireless receiver approximately 1 meter or closer to the steering wheel. Failure to do so may result in decreased wireless speeds and/or latency.
• For hubs that may experience significant electromagnetic interference (EMI), such as the Fanatec DD1/2, the optimal choice is to connect the wheel using an externally powered USB hub, along with a USB isolator. Additionally, it's recommended to ensure the DD1/2 has an additional ground wire.
• Fanatec compatibility has only been tested with driver and hardware versions prior to May 1, 2024.

You can download the manual here .