The GETAIL G0 Skeleton is an ultralight sim racing wheel extender in aerospace-grade 7075 aluminium, available in 50 mm (72.5 g) and 100 mm (95 g), with a 23 mm skeletonised hollow shaft and native 70 mm PCD compatibility.
Every extender improves FOV and driving posture, but it also adds mass to the wheelbase shaft. The G0 Skeleton attacks exactly that problem: by hollowing out the structure and using 7075 aluminium, the 100 mm version weighs less than most 50 mm spacers on the market, so the extra inertia on the direct drive wheelbase is minimal.
Key features of the GETAIL G0 Skeleton
- 72.5 g at 50 mm and 95 g at 100 mm: up to 50% and 80% lighter than the competition, according to GETAIL.
- Aerospace-grade 7075 aluminium: the strongest alloy in the range, which is what allows material to be removed without losing rigidity.
- Skeletonised structure: an open design that takes mass out where it adds no structural stiffness.
- 23 mm hollow shaft: a slim profile that barely intrudes on your view and leaves room for steering wheel cabling.
- Passthrough QR compatible: the hollow interior takes quick release systems with internal routing.
- Native 70 mm PCD: plus 50.8 mm by adding the G-Universal Adapter.
- Seven finishes: Machine Essence, Milano Grey, Royal Amethyst, Sunset Red, St. Moritz Gold, Visionary Green and Portofino Blue.
Technical specifications
| Specification | G0 Skeleton 50 mm | G0 Skeleton 100 mm |
|---|---|---|
| Length | 50 mm | 100 mm |
| Weight | 72.5 g | 95 g |
| Weight saving vs competitors | Up to 50% | Up to 80% |
| Material | Aerospace-grade 7075 aluminium | Aerospace-grade 7075 aluminium |
| Shaft diameter | 23 mm | 23 mm |
| Construction | Skeletonised hollow shaft | Skeletonised hollow shaft |
| Native compatibility | 70 mm PCD | 70 mm PCD |
| Compatibility with adapter | 50.8 mm PCD | 50.8 mm PCD |
| Passthrough QR | Compatible | Compatible |
Which version should you choose?
The 50 mm is the fine adjustment: it brings the wheel just close enough to correct your posture without touching the cockpit geometry, at the lowest weight in the range. The 100 mm doubles the extension and is the choice when you want to drop the monitor properly, drive in a reclined position or run large-diameter wheels; even then, its 95 g stay below most spacers of half that length.
Compatibility
The G0 Skeleton is a mechanical accessory fitted between the wheelbase and the wheel, so it works the same on PC and on console depending on what your own base supports.
- Native compatibility: wheels, quick releases and wheelbases with a 70 mm PCD.
- With the G-Universal Adapter: 50.8 mm PCD and Cammus, Conspit, Simagic, Simagic Evo, Simucube 2, Simucube 3, Simlab, VNM and VRS wheelbases.
- Quick release: compatible with passthrough systems thanks to the hollow shaft.
Frequently asked questions
Which G0 Skeleton length should I choose, 50 or 100 mm?
The 50 mm version (72.5 g) is the fine adjustment: it brings the wheel just close enough to correct your posture without changing the cockpit geometry. The 100 mm (95 g) gives twice the extension and is the one to pick when you want to drop the monitor properly or drive in a reclined position.
Is the G0 Skeleton compatible with my direct drive wheelbase?
It fits natively on any wheel or system with a 70 mm PCD. With the G-Universal Adapter, compatibility extends to 50.8 mm PCD and to Cammus, Conspit, Simagic, Simagic Evo, Simucube 2, Simucube 3, Simlab, VNM and VRS wheelbases.
Why is the G0 Skeleton so light?
Two design decisions: aerospace-grade 7075 aluminium and a skeletonised architecture built around a 23 mm hollow shaft. GETAIL puts the saving against competitors at up to 50% on the 50 mm version and up to 80% on the 100 mm.
Does it work with a passthrough quick release?
Yes. The G0 Skeleton shaft is hollow, so it takes quick release systems with internal cable routing.
What is the difference between the G0 Skeleton and the G1 range?
The G0 Skeleton prioritises weight: 7075 aluminium, a skeletonised structure and a 23 mm hollow shaft, at 72.5 g or 95 g depending on length. The G1 range is solid 6061 aluminium, with a dual 70 mm plus Simucube pattern on both ends and high-luster finishes.
Which colours is it available in?
The G0 Skeleton comes in seven finishes: Machine Essence, Milano Grey, Royal Amethyst, Sunset Red, St. Moritz Gold, Visionary Green and Portofino Blue. Colour is purely cosmetic and changes neither weight nor compatibility.
Buying your wheel extender from Simufy means buying with full guarantees
- Official premium sim racing distributor in Spain and Portugal — over 70 brands
- The only Official Fanatec out-of-warranty Repair Centre in Europe
- Simucube Premium Reseller — one of only four in Europe
- Shipping from our own 5,000 m² warehouse and Barcelona showroom
- Specialised technical support and official warranty on every product
- Tailored financing: leasing and renting available
Frequently Asked Questions
A product in PRE-ORDER means it's not yet available for immediate delivery, but is on its way and can be pre-ordered before its official availability. This guarantees that you'll have access to the product once it's in stock. We recommend placing a PRE-ORDER to avoid missing out and skipping the next batch.
Pre-order product availability dates are listed on the relevant product page or on our #pre-orders Discord channel: https://discord.gg/simufy
When a product is in stock, it means it's available in our warehouses and can be shipped immediately after the order is placed.
Absolutely yes. The products offered are carefully selected to meet high quality standards. This ensures that the materials used are durable, safe, and fit for their intended purpose.
You can find out if the product you want is in stock by checking the product page. Typically, a message will appear indicating its availability, such as "Shipping immediately" or units available. If it's not in stock, one of these statuses will typically appear: - Out of stock: No units are available and you may have to wait for them to be restocked. - Pre-order: The product is available for reservation before it arrives in the warehouse.
No, every order is shipped in a single shipment. If the order contains both in-stock and out-of-stock items, the order will be shipped as soon as all items are in stock. If you wish to receive in-stock items immediately, you must place multiple orders or request an additional shipping charge.
VISA or MasterCard credit cards, PayPal, Klarna or bank transfer
Simufy offers all customers the option to defer payment for any or all of their orders through the financial institution Klarna.
Klarna offers financing valid for orders up to €1,500 and up to 3 interest-free installments.
Yes, as long as the product is received in the same condition as it was sent. The refund will be issued after manual verification of the returned product's conformity, using the same method used for payment. For more information, please consult our Return Policy.