The Simufy S150 is an ultralight 150 mm, 118 g sim racing wheel extender with a 23 mm skeletonised hollow shaft and native 70 mm PCD compatibility, built for setups that need the maximum separation between base and wheel.
It is the longest in the Simufy range: 150 mm that bring the rim closer to the driver in reclined positions, with screens mounted very near, or when running large-diameter wheels. And it does so at 118 g, up to 80% less than equivalent alternatives, so the direct drive wheelbase barely notices the added mass.
Key features of the Simufy S150
- 150 mm at just 118 g: up to 80% lighter than alternatives in its length range.
- Maximum FOV and ergonomic gain: the option for reclined positions and large-diameter wheels.
- Skeletonised hollow shaft: material is removed where it adds no structural stiffness.
- 23 mm shaft diameter: a slim profile that barely intrudes on the driving position.
- Passthrough QR compatible: the hollow interior leaves room for steering wheel cabling.
- Native 70 mm PCD: plus 50.8 mm by adding the G-Universal Adapter.
- Two finishes: Stealth Black and Racing Orange.
Technical specifications
| Specification | Value |
|---|---|
| Length | 150 mm |
| Weight | 118 g |
| Weight saving vs equivalent alternatives | Up to 80% |
| Shaft diameter | 23 mm |
| Construction | Skeletonised hollow shaft |
| Native compatibility | 70 mm PCD |
| Compatibility with adapter | 50.8 mm PCD |
| Passthrough QR | Compatible |
| Finishes | Stealth Black, Racing Orange |
Compatibility
The S150 is a mechanical accessory fitted between the wheelbase and the wheel, so it works the same on PC and on console depending on what your own base supports.
- Native compatibility: wheels, quick releases and wheelbases with a 70 mm PCD.
- With the G-Universal Adapter: 50.8 mm PCD and Cammus, Conspit, Simagic, Simagic Evo, Simucube 2, Simucube 3, Simlab, VNM and VRS wheelbases.
- Quick release: compatible with passthrough systems thanks to the hollow shaft.
Frequently asked questions
When do I need a 150 mm extender?
When the base sits too far from the driver: reclined driving positions, cockpits with the screen very close, triple monitor setups or large-diameter wheels. In those cases, 150 mm bring the rim closer without moving the base or the seat.
Does 118 g affect force feedback?
Very little for its length. The S150 weighs 118 g at 150 mm, up to 80% less than equivalent alternatives, so the inertia added to the wheelbase shaft stays low.
Is the Simufy S150 compatible with my wheel and wheelbase?
It fits natively on wheels, quick releases and wheelbases with a 70 mm PCD. With the G-Universal Adapter, compatibility extends to 50.8 mm PCD and to Cammus, Conspit, Simagic, Simagic Evo, Simucube 2, Simucube 3, Simlab, VNM and VRS wheelbases.
Does it work with a passthrough quick release?
Yes. The S150 shaft is hollow, so it takes quick release systems with internal cable routing.
What is the difference between the Simufy S150 and the S100?
Length and weight: the S150 is 150 mm and weighs 118 g; the S100 is 100 mm and weighs 95 g. They share the same 23 mm skeletonised hollow shaft, PCD compatibility and the same two finishes.
Which finishes is the S150 available in?
Two finishes: Stealth Black and Racing Orange. Colour is purely cosmetic and changes neither weight, dimensions nor compatibility.
Buying your wheel extender from Simufy means buying with full guarantees
- Official premium sim racing distributor in Spain and Portugal — over 70 brands
- The only Official Fanatec out-of-warranty Repair Centre in Europe
- Simucube Premium Reseller — one of only four in Europe
- Shipping from our own 5,000 m² warehouse and Barcelona showroom
- Specialised technical support and official warranty on every product
- Tailored financing: leasing and renting available
Frequently asked questions
A pre-order product is not yet available for immediate delivery, but it is on its way and can be reserved in advance before its official availability. This guarantees you will get the product as soon as it is in stock. We recommend pre-ordering to make sure you don't miss out on a unit and have to wait for the next batch.
Availability dates for pre-order products are shown on the corresponding product page and also in our #pre-orders channel on Discord: https://discord.gg/simufy
When a product is in stock, it is available in our warehouses and can be shipped immediately after you place your order.
Absolutely. The products we offer are carefully selected to meet high quality standards. This ensures that the materials used are durable, safe and suited to their intended purpose.
Check the product page. It usually shows a message indicating availability, such as "Ships immediately" or the number of units available. If the product is not in stock, one of these statuses is usually shown: - Sold out: no units are available and you may have to wait for a restock. - Pre-order: the product can be reserved before it arrives at our warehouse.
No, every order is sent as a single shipment. If an order contains both in-stock and out-of-stock items, it will ship as soon as all of its items are in stock. If you want to receive the in-stock items right away, you will need to place separate orders or ask us to charge an additional shipping fee.
VISA or Mastercard credit cards, PayPal, Aplazame, Klarna or bank transfer.
Simufy gives every customer the option to defer payment for any or all of their orders through the financing providers Aplazame or Klarna.
Klarna offers financing for orders of up to €1,500, in up to 3 interest-free instalments.
Aplazame offers financing for orders of up to €3,000, in up to 24 instalments with interest. The down payment and subsequent instalments are fully flexible and up to you.
Yes, as long as the product is received in the same condition in which it was shipped. The refund will be issued after the returned product has been manually inspected and approved, using the same payment method used for the purchase. For more information, see our Returns Policy.