GETAIL G1-70 70 mm – Steering Wheel Extender

Brand: GETAIL
GETAIL G1-70 70 mm steering wheel extender in machined aluminium, main product view
GETAIL G1 extender fitted between the direct drive wheelbase and the wheel in a sim racing cockpit
GETAIL G1-70 70 mm – Steering Wheel Extender
Close-up of the CNC machining and 70 mm bolt pattern of the GETAIL G1 extender
Side view of the GETAIL G1 steering wheel extender in machined 6061 aluminium
GETAIL G1-70 fitted in a racing simulator with the monitor lowered to improve FOV
Hand-applied high-luster finish of the GETAIL G1 steering wheel extender
GETAIL G1 steering wheel extender in aerospace-grade 6061 aluminium on a neutral background
Staggered dual-helix design of the GETAIL G1-70 for front mounting with a screwdriver
GETAIL G1-70 colours: Sunset Red, Portofino Blue, St. Moritz Gold and Milano Grey
45.5 mm usable inner space of the GETAIL G1-70 for cable routing

GETAIL G1-70 70 mm – Steering Wheel Extender

Brand: GETAIL
Regular price €109,99 Sale price €99,99 - 9%
/
Tax included. Shipping calculated at checkout.
  • Inventory on the way
%3Cp%3E%C2%A1%3Cstrong%3EGana%20[points_amount]%20%3C/strong%3Econ%20esta%20compra!%3C/p%3E
100% secure payment

100% secure payment

3-year warranty

3-year warranty


Shipping within 24/48 hours

24/48 hour delivery (Iberian Peninsula)*

Personalized attention

Personalized attention

*More information in Shipping Policy.

The GETAIL G1-70 is a 70 mm, 119 g steering wheel extender for sim racing, machined from a single block of 6061 aluminium and compatible with direct drive wheelbases using a 70 mm or Simucube bolt pattern, aimed at drivers who want to fine-tune their FOV without penalising force feedback.

Moving the wheel away from the base lets you drop the monitor by more than 10 cm and line up your eyes, the rim and the screen properly. The G1-70 does it with a staggered dual-helix design that bolts up from the front with a screwdriver, and at 119 g it adds almost no inertia to the wheelbase shaft.

Key features of the GETAIL G1-70

  • 70 mm of extension: repositions the direct drive wheelbase and lets you lower the monitor by more than 10 cm for a wider field of view.
  • Only 119 g: minimal mass added to the shaft, with no loss of force feedback sensitivity or detail.
  • Aerospace-grade 6061 aluminium: single-block CNC machining, with no joints or intermediate structural fasteners.
  • Staggered dual-helix design: front-access mounting with a screwdriver, without removing the base from the cockpit.
  • Dual bolt pattern on both ends: 70 mm PCD and the Simucube pattern, which avoids adapters on most setups.
  • 45.5 mm of usable inner space: clear routing for steering wheel cabling and passthrough quick release systems.
  • Hand-applied high-luster finish: available in Sunset Red, Portofino Blue, St. Moritz Gold and Milano Grey.

Technical specifications

SpecificationValue
Overall length70 mm
Weight119 g
MaterialAerospace-grade 6061 aluminium
ManufacturingSingle-block CNC machining
Bolt pattern70 mm PCD + Simucube (both ends)
Usable inner space45.5 mm
Mounting systemStaggered dual helix
FinishHand-applied high luster
ColoursSunset Red, Portofino Blue, St. Moritz Gold, Milano Grey

Compatibility

The G1-70 is a mechanical accessory fitted between the wheelbase and the wheel, so it works the same on PC and on console depending on what your own base supports.

  • Native compatibility, no adapter: Simucube, VRS, VNM and any wheelbase with a 70 mm PCD or Simucube bolt pattern.
  • Compatible with conditions: Asetek (the wheel must be removed), Fanatec (Podium Hub only), Moza and Simagic with a 70 mm pattern.
  • Extended compatibility with the G-Universal Adapter: Cammus, Conspit, the full Simagic and Simagic Evo range, Simucube 2, Simucube 3, Simlab, VNM and VRS.
  • Wheels and quick releases: any with a 70 mm PCD; with the G-Universal Adapter, 50.8 mm PCD as well.

Frequently asked questions

Is the GETAIL G1-70 compatible with my direct drive wheelbase?

It bolts natively onto Simucube, VRS, VNM and any wheelbase with a 70 mm PCD or Simucube pattern. On Asetek the wheel has to be removed, on Fanatec it works with the Podium Hub, and Moza or Simagic require a 70 mm pattern. The G-Universal Adapter adds Cammus, Conspit, Simagic Evo, Simucube 2 and 3, Simlab, VNM and VRS.

Does a 119 g extender affect force feedback?

The G1-70 weighs 119 g, a very low figure for a 70 mm solid machined aluminium part. The inertia added to the shaft is minimal and does not noticeably change the detail or the response speed of a direct drive wheelbase.

How far can I lower my monitor with the G1-70?

By bringing the wheel 70 mm forward of the base, most cockpits allow the monitor to be dropped by more than 10 cm without the wheelbase blocking the bottom of the screen, which widens the usable field of view.

What is the difference between the G1-70 and the G1-123?

Length and weight: the G1-70 is 70 mm long and weighs 119 g, with 45.5 mm of usable inner space; the G1-123 is 123 mm and weighs 163 g, with 98.5 mm of inner space. Material, bolt patterns and finishes are identical.

Do I need special tools to install it?

No. The staggered dual-helix design gives front access to the bolts, so a screwdriver is enough and the wheelbase does not need to come out of the cockpit.

Does the wheel cabling run inside the extender?

Yes. The G1-70 leaves 45.5 mm of usable inner space, enough for wheel cabling and for quick release systems with passthrough.

Buying your steering wheel extender from Simufy means buying with full guarantees

  • Official premium sim racing distributor in Spain and Portugal — over 70 brands
  • The only Official Fanatec out-of-warranty Repair Centre in Europe
  • Simucube Premium Reseller — one of only four in Europe
  • Shipping from our own 5,000 m² warehouse and Barcelona showroom
  • Specialised technical support and official warranty on every product
  • Tailored financing: leasing and renting available

Preguntas frecuentes

Un producto en PRE-ORDER significa que aún no está disponible para entrega inmediata, pero uqe está en camino y se puede reservar con antelación antes de su disponibilidad oficial. Esto garantiza que se tendrá acceso al producto una vez que esté en stock. Recomendamos realizar el PRE-ORDER para evitar quedarse sin una unidad y saltar al siguiente batch.

Las fechas de disponibilidad de los productos en pre-order se indican en la página de producto correspondiente o también en nuestro canal #pre-orders de Discord: https://discord.gg/simufy

Cuando un producto está en stock, significa que está disponible en nuestros almacenes y puede ser enviado de manera inmediata tras realizar el pedido.

Rotundamente sí. Los productos ofrecidos son seleccionados cuidadosamente para cumplir con altos estándares de calidad. Esto garantiza que los materiales utilizados sean duraderos, seguros y adecuados para el propósito previsto.

Puedes saber si el producto que deseas está en stock revisando la página del producto. Normalmente, aparecerá un mensaje que indica su disponibilidad, como "Envío inmediato" o las unidades disponibles. Si no está en stock, es común que se muestre uno de estos estados: - Agotado: No hay unidades disponibles y podría haber que esperar a que se repongan. - Pre-order: El producto está disponible para reservar antes de que llegue al almacén.

No, todo pedido se envía mediante un único envío. Si el pedido contiene artículos en stock y sin stock, el pedido será enviado tan pronto estén todos los artículos del mismo en stock. Si se desea recibir los artículos en stock de manera inmediata, es necesario realizar múltiples pedidos o solicitarnos el cargo de un porte adicional.

Tarjetas de crédito VISA o MasterCard, PayPal, Aplazame, Klarna o Transferencia Bancaria

Simufy pone a disposición de cualquier cliente la posibilidad de aplazar el pago de cualquier o todos sus pedidos a través de la entidad financiera Aplazame o Klarna.

Klarna ofrece financiación válida para pedidos de un importe de hasta 1.500€ y en un máximo de 3 plazos sin intereses.

Aplazame ofrece financiación válida para pedidos de un importe de hasta 3.000€ y en un máximo de 24 plazos con intereses. Cuota inicial y plazos venideros totalmente flexibles a su elección.

Sí, siempre y cuando el producto se reciba en el mismo estado que se envió. El reembolso se efectuará tras la verificación manual y conformidad del producto devuelto, por el mismo medio que se efectuó el pago. Para más información puedes consultar nuestra Política de devoluciones.