The Simucube Co-Pedal is a 2-in-1 passive sim racing pedal that can be configured as either a throttle or a clutch using interchangeable Arc profiles, designed to complete a setup built around the Simucube ActivePedal Pro or ActivePedal Ultimate.
It ships pre-assembled as a throttle and converts to a clutch in a few minutes by swapping the Arc profile, the pedal face and the spring, all supplied in the box. Unlike load cell pedals, it measures position with a hall angle sensor: it reads the actual angle of the pedal lever, removes dead zones and keeps sensor feedback consistent across the entire travel. Preload, travel, pedal angle and pedal face tilt and height are all adjusted with the included tools.
Key features
- 2-in-1, throttle or clutch: the conversion uses the Arc profile, pedal face and clutch spring supplied in the box.
- Patented Arc technology: a linear profile for progressive throttle control and an engagement profile for a clutch with a distinct bite point.
- Hall angle sensor: consistent readings across the full travel, with no dead zones.
- Maximum force of 11 kg (approx. 110 N) as a throttle and 25 kg (approx. 250 N) as a clutch, at 100% preload and 70 mm travel.
- Three travel positions (30, 50 and 70 mm) and preload adjustable from 0 to 13 mm (approx. 0 – 5 kg).
- Redesigned shell frame that reduces flex, weighing 1.6 kg, with inverted mounting available for the clutch configuration.
- 3-year manufacturer warranty.
Technical specifications
| Parameter | Value |
|---|---|
| Pedal type | Passive, configurable as throttle or clutch |
| Sensor | Hall angle sensor |
| Adjustable travel | 30 mm – 50 mm – 70 mm |
| Rest angle | 4° – 14° |
| Preload | 0 – 13 mm (approx. 0 – 5 kg) |
| Maximum force as throttle | 11 kg (approx. 110 N) at 100% preload and 70 mm travel |
| Maximum force as clutch | 25 kg (approx. 250 N) at 100% preload and 70 mm travel |
| Dimensions (H x W x L) | 242 mm x 83 mm x 308 mm (throttle configuration) |
| Weight | 1.6 kg |
| Mounting | 4x M5 slots |
| Connection | 60 cm RJ25 cable to an ActivePedal |
| Warranty | 3 years |
What is in the box
- 1x Simucube Co-Pedal, pre-assembled as a throttle
- 1x clutch pedal face (ActivePedal Ultimate pedal face)
- 1x clutch spring, stiffer than the throttle spring
- 1x clutch Arc profile
- 1x 60 cm RJ25 cable
- 1x M5 fastener set for aluminium profile and baseplate
- 1x 4 mm hex key with ball tip and T-handle
- 1x special tool for the preload screw
- 1x quick start guide
Compatibility
- Compatible with the Simucube ActivePedal Pro and Simucube ActivePedal Ultimate: as a passive pedal, it needs one of them to work and does not connect directly to a computer.
- A system supports one or two Co-Pedals alongside an ActivePedal Pro or an ActivePedal Primary set; with two ActivePedals (Primary + Add-on), one Co-Pedal can be added.
- Two units are required if you want a throttle and a clutch at the same time.
- It mounts to the aluminium profile of your cockpit or, optionally, to the ActivePedal baseplate.
- Requires a PC with a free USB port for the ActivePedal: the setup is not compatible with consoles.
- Works with the rest of the Simucube pedal accessory range, such as the Throttle Damper and the ActivePedal Ultimate pedal faces.
Frequently asked questions
Does the Simucube Co-Pedal work without an ActivePedal?
No. It is a passive pedal and needs a Simucube ActivePedal Pro or an ActivePedal Primary set, to which it connects using the 60 cm RJ25 cable supplied. It does not connect directly to a PC.
How many Co-Pedals do I need for a throttle and a clutch?
Two. Each Co-Pedal works as a throttle or as a clutch, but not as both at once, so two units are required to have both functions.
How do you convert the Co-Pedal from throttle to clutch?
By swapping three parts supplied in the box: the Arc profile, the pedal face and the spring. It takes a few minutes using the 4 mm hex key and the preload tool that come with the pedal.
What maximum force does the Simucube Co-Pedal deliver?
Up to 11 kg (approx. 110 N) in throttle configuration and up to 25 kg (approx. 250 N) in clutch configuration, measured at 100% preload and 70 mm travel.
Does the Co-Pedal use a load cell?
No. It uses a hall angle sensor that measures the angular position of the pedal lever rather than the force applied, the same principle used in the throttle and clutch pedals of race cars. This removes dead zones and keeps the reading consistent across the entire travel.
What warranty does the Simucube Co-Pedal have?
A 3-year manufacturer warranty. At Simufy you also get official warranty cover and specialised technical support.
Buying your pedal from Simufy means buying with full guarantees
- Official premium sim racing distributor in Spain and Portugal — over 70 brands
- The only Official Fanatec out-of-warranty Repair Centre in Europe
- Simucube Premium Reseller — one of only four in Europe
- Shipping from our own 5,000 m² warehouse and Barcelona showroom
- Specialised technical support and official warranty on every product
- Tailored financing: leasing and renting available
Frequently asked questions
A pre-order product is not yet available for immediate delivery, but it is on its way and can be reserved in advance before its official availability. This guarantees you will get the product as soon as it is in stock. We recommend pre-ordering to make sure you don't miss out on a unit and have to wait for the next batch.
Availability dates for pre-order products are shown on the corresponding product page and also in our #pre-orders channel on Discord: https://discord.gg/simufy
When a product is in stock, it is available in our warehouses and can be shipped immediately after you place your order.
Absolutely. The products we offer are carefully selected to meet high quality standards. This ensures that the materials used are durable, safe and suited to their intended purpose.
Check the product page. It usually shows a message indicating availability, such as "Ships immediately" or the number of units available. If the product is not in stock, one of these statuses is usually shown: - Sold out: no units are available and you may have to wait for a restock. - Pre-order: the product can be reserved before it arrives at our warehouse.
No, every order is sent as a single shipment. If an order contains both in-stock and out-of-stock items, it will ship as soon as all of its items are in stock. If you want to receive the in-stock items right away, you will need to place separate orders or ask us to charge an additional shipping fee.
VISA or Mastercard credit cards, PayPal, Aplazame, Klarna or bank transfer.
Simufy gives every customer the option to defer payment for any or all of their orders through the financing providers Aplazame or Klarna.
Klarna offers financing for orders of up to €1,500, in up to 3 interest-free instalments.
Aplazame offers financing for orders of up to €3,000, in up to 24 instalments with interest. The down payment and subsequent instalments are fully flexible and up to you.
Yes, as long as the product is received in the same condition in which it was shipped. The refund will be issued after the returned product has been manually inspected and approved, using the same payment method used for the purchase. For more information, see our Returns Policy.