PXN Z-D1 Steel – Desk Mount for Handbrake

Brand: PXN
Soporte de mesa PXN Z-D1 de acero al carbono para freno de mano
Placa de anclaje del soporte PXN Z-D1 con sus orificios de montaje
Mordazas de mesa del soporte PXN Z-D1
Soporte PXN Z-D1 fijado al canto de un escritorio
Detalle de la tornillería allen del soporte PXN Z-D1
Soporte PXN Z-D1 con el freno de mano PXN HBS montado
Perfil lateral del soporte de mesa PXN Z-D1
Soporte PXN Z-D1 visto en perspectiva
Conjunto del soporte PXN Z-D1 con sus accesorios de montaje
Soporte de mesa PXN Z-D1 de acero al carbono para freno de mano
Placa de anclaje del soporte PXN Z-D1 con sus orificios de montaje
Mordazas de mesa del soporte PXN Z-D1
Soporte PXN Z-D1 fijado al canto de un escritorio
Detalle de la tornillería allen del soporte PXN Z-D1
Soporte PXN Z-D1 con el freno de mano PXN HBS montado
Perfil lateral del soporte de mesa PXN Z-D1
Soporte PXN Z-D1 visto en perspectiva
Conjunto del soporte PXN Z-D1 con sus accesorios de montaje

PXN Z-D1 Steel – Desk Mount for Handbrake

Brand: PXN
- 10%
/
Tax included. Shipping calculated at checkout.
  • Inventory on the way
%3Cp%3E%C2%A1%3Cstrong%3EGana%20[points_amount]%20%3C/strong%3Econ%20esta%20compra!%3C/p%3E
100% secure payment

100% secure payment

3-year warranty

3-year warranty

Shipping within 24/48 hours

24/48 hour delivery (Iberian Peninsula)*

Personalized attention

Personalized attention

*More information in Shipping Policy.

The PXN Z-D1 is a carbon steel desk mount for the PXN HBS handbrake, made up of a mounting plate and two clamps that tighten onto either side of the desk edge.

The idea is straightforward: a handbrake gets pulled hard, and if it is not properly secured it shifts. The Z-D1 gives it a rigid steel platform with dual clamping on the left and the right, so the load stays centred and the lever does not move under the pull. It is the answer when you do not want to build a full aluminium profile cockpit just to anchor a handbrake.

Key features of the PXN Z-D1

  • Carbon steel construction, hard-wearing and low-wear.
  • Dual clamping with one clamp on each side of the plate, spreading the load.
  • Top plate with pre-aligned holes for mounting the PXN HBS.
  • Fixed to the plate with internal hex screws, no special tools needed.
  • Plate measuring 165 × 108 × 4 mm and clamps of 35 × 82 × 115 mm with the screws tightened.
  • Fits and removes without drilling the desk.

Technical specifications

Specification PXN Z-D1
Type Desk mount for a handbrake
Material Carbon steel
Fixing system Dual clamp, left and right
Plate dimensions Approximately 165 × 108 × 4 mm
Clamp dimensions Approximately 35 × 82 × 115 mm with the screws tightened
Fasteners Internal hex screws
Weight 1.75 kg
Colour Black
In the box Z-D1 plate, two desk clamps and an accessories pack

Compatibility

  • Designed for the PXN HBS handbrake: the plate holes follow its mounting pattern, this is not a generic flat plate.
  • PXN states that the plate also takes other accessories from the brand that are set up for desk mounting.
  • The handbrake is not included: the Z-D1 is the mount only.
  • Fits onto the edge of a desk or solid table. If you already run an aluminium profile cockpit, the HBS bolts straight to the frame and this mount is not needed.

Frequently asked questions about the PXN Z-D1

Does the PXN Z-D1 include the handbrake?

No. The Z-D1 is the mount only: the steel plate, the two desk clamps and the mounting accessories pack. The PXN HBS handbrake is sold separately.

What exactly is it for?

To anchor the handbrake to the edge of a desk on a rigid base. Pulling the lever in rally or drift puts a fair bit of force through it, and without a solid fixing the handbrake shifts and you lose your reference between pulls.

Does it only fit the PXN HBS?

It is designed for the HBS: the plate holes follow its mounting pattern, so the handbrake sits centred relative to the clamps. PXN states that the plate also takes other accessories from the brand set up for desk mounting.

How is it installed?

First bolt the handbrake to the plate using the pre-aligned holes. Then fix the two clamps to the plate with the internal hex screws, position the assembly on the desk edge and tighten both sides evenly so it does not twist.

Do I need to drill the desk?

No. It is a clamp system: it tightens against the desk edge and comes off whenever you want, leaving no drill marks.

Is it any use if I already have a cockpit?

If your cockpit is aluminium profile, you do not need it: the handbrake bolts straight to the frame. The Z-D1 is aimed at people playing at a desk with no rigid structure to anchor it to.

Buying your desk mount from Simufy means buying with full guarantees

  • Official premium sim racing distributor in Spain and Portugal — over 70 brands
  • The only Official Fanatec out-of-warranty Repair Centre in Europe
  • Simucube Premium Reseller — one of only four in Europe
  • Shipping from our own 5,000 m² warehouse and Barcelona showroom
  • Specialised technical support and official warranty on every product
  • Tailored financing: leasing and renting available

Frequently asked questions

A pre-order product is not yet available for immediate delivery, but it is on its way and can be reserved in advance before its official availability. This guarantees you will get the product as soon as it is in stock. We recommend pre-ordering to make sure you don't miss out on a unit and have to wait for the next batch.

Availability dates for pre-order products are shown on the corresponding product page and also in our #pre-orders channel on Discord: https://discord.gg/simufy

When a product is in stock, it is available in our warehouses and can be shipped immediately after you place your order.

Absolutely. The products we offer are carefully selected to meet high quality standards. This ensures that the materials used are durable, safe and suited to their intended purpose.

Check the product page. It usually shows a message indicating availability, such as "Ships immediately" or the number of units available. If the product is not in stock, one of these statuses is usually shown: - Sold out: no units are available and you may have to wait for a restock. - Pre-order: the product can be reserved before it arrives at our warehouse.

No, every order is sent as a single shipment. If an order contains both in-stock and out-of-stock items, it will ship as soon as all of its items are in stock. If you want to receive the in-stock items right away, you will need to place separate orders or ask us to charge an additional shipping fee.

VISA or Mastercard credit cards, PayPal, Aplazame, Klarna or bank transfer.

Simufy gives every customer the option to defer payment for any or all of their orders through the financing providers Aplazame or Klarna.

Klarna offers financing for orders of up to €1,500, in up to 3 interest-free instalments.

Aplazame offers financing for orders of up to €3,000, in up to 24 instalments with interest. The down payment and subsequent instalments are fully flexible and up to you.

Yes, as long as the product is received in the same condition in which it was shipped. The refund will be issued after the returned product has been manually inspected and approved, using the same payment method used for the purchase. For more information, see our Returns Policy.